Weld Gauge
Weld Gauge A weld gauge is a tool used in the welding industry to measure the quality and consistency of welds. It is a…
Feeler Gauge
Feeler Gauge A feeler gauge is a precision measuring tool used to measure small gaps or clearances between two objects or surfaces. It consists…
Master Foils
Master Foils Master foils are pre-printed sheets that are used in the printing industry to produce large quantities of identical prints quickly and efficiently.…
Coating Thickness Gauge
Coating Thickness Gauge A coating thickness gauge, also known as a paint meter, is a tool used to measure the thickness of coatings or…
Shore Hardness Tester
Shore Hardness Tester Shore hardness testers are used to determine the hardness of materials. The Shore hardness test was developed by Albert F. Shore…
Tachometer
Tachometer A tachometer, also known as a rev counter, is an instrument used to measure the rotational speed of an engine or other rotating…
Sound Level Meter
Sound Level Meter A Sound Level Meter (SLM) is a device used to measure the sound pressure level (SPL) or sound intensity in decibels…
Hydro Meter
Hydro Meter A hydrometer is an instrument that is used to measure the specific gravity or relative density of a liquid. Specific gravity is…
Conductivity Meter
Conductivity Meter A conductivity meter is an analytical instrument used to measure the electrical conductivity of a liquid or solution. The electrical conductivity of…
TDS Meter
TDS Meter A TDS (Total Dissolved Solids) meter is a device that measures the concentration of dissolved solids in a liquid. TDS is a…
PH Meter
PH Meter A pH meter is a scientific instrument used to measure the acidity or alkalinity (pH) of a solution. pH is a measure…
Ford Cup
Ford Cup The Ford Cup is a type of viscosity cup used in non-destructive testing (NDT) to determine the viscosity of liquid penetrant materials.…
PI Tape
PI Tape The PI Tape, also known as the P.I. Gauge Tape or the Pitometer Logarithmic Tape, is a specialized measuring tool used in…
Anemometer
Anemometer An anemometer is a device used to measure wind speed and direction. It is an essential tool for meteorology, environmental science, and wind…
Lux Meter
Lux Meter A lux meter, also known as a light meter, is a device that measures the intensity of light in a specific area.…
Bulk Density Cylinder
Bulk Density Cylinder Bulk density is defined as the mass of a material divided by its volume, and it is commonly used to describe…
Sieve Shaker
Sieve Shaker A sieve shaker is a laboratory instrument used for particle size analysis of various materials, including minerals, soils, aggregates, and other granular…
Thermo Hygrometer
Thermo Hygrometer A thermo-hygrometer is a device used to measure both temperature and relative humidity in the air. This device is widely used in…
Permeability Apparatus
Permeability Apparatus Permeability is the property of a porous material that allows fluids to pass through it. The measurement of permeability is essential in…
Vernier Caliper
Vernier Caliper A Vernier caliper is a precision measuring instrument commonly used in engineering, machining, and scientific fields to measure linear dimensions with a…
Plunger Dial Gauge
Plunger Dial Gauge A plunger dial gauge, also known as a dial test indicator or a lever-type dial indicator, is a precision measuring instrument…
Crushing Apparatus
Crushing Apparatus A crushing apparatus is a machine or device used to reduce the size or change the shape of a material through a…
Water Bath
Water Bath A water bath is a laboratory instrument used for heating or incubating samples in a water-filled container. It provides a controlled temperature…
Impact Tester
Impact Tester An impact tester is a mechanical device that is used to measure the impact resistance of a material or product. It is…
Marsh Cone
Marsh Cone The Marsh Cone is a device used for measuring the viscosity of a fluid, particularly drilling fluids used in the oil and…
Slump Cone with Tapping Rod
Slump Cone With Tapping Rod Slump cone test is one of the most commonly used tests in the construction industry to determine the workability…
Elongation / Flakiness Index
Elongation / Flakiness Index The Elongation Index and Flakiness Index are two measures of aggregate shape characteristics that are commonly used in the construction…
Le Chatelier Mould
Le Chatelier Mould Le Chatelier Mould is a device used for determining the soundness of cement, which is an important quality attribute that ensures…
Pressure gauge (Up to 1000 bar)
Pressure Gauge (Up To 1000 Bar) A pressure gauge is a measuring device that is used to measure the pressure of a fluid or…
Weighing Machine (Up to 300 kg)
Weighing Machine (Up To 300 Kg) A weighing machine, also known as a scale or a balance, is a device used to measure the…
Measuring Jar (Up to 20 l)
Measuring Jar (Up To 20 L) A measuring jar is a tool used to measure the volume of liquids. It is a container with…
Measuring Tape / Scale (Any Range)
Measuring Tape / Scale (Any Range) Measuring tapes or scales are tools used to measure length or distance. They are commonly used in construction,…
Cube Mould (Up to 150 mm)
Cube Mould (Up To 150 Mm) Cube moulds are an important tool used in construction and civil engineering to create concrete cubes of precise…
Vibration Machine – (Up to 12000 RPM)
Vibration Machine – (Up To 12000 RPM) A vibration machine, also known as a vibration plate or whole-body vibration machine, is a piece of…
Vicat Apparatus (Up to 50 mm)
Vicat Apparatus (Up To 50 Mm) Vicat apparatus is an instrument used in the Non-Destructive Testing (NDT) of concrete to determine its setting time.…
Test Sives – (45 microns to 200 mm)
Test Sives – (45 Microns To 200 Mm) Test sieves are a type of equipment used in particle size analysis to separate and classify…
Compression / Cube Testing Machine – (Up to 2000 kN)
Compression / Cube Testing Machine – (Up To 2000 KN) A Compression/Cube Testing Machine is a device used to determine the compressive strength of…
CRO / Oscilloscope (up to 600 MHz)
CRO / Oscilloscope (Up To 600 MHz) A Cathode Ray Oscilloscope (CRO), also known as an Oscilloscope, is a type of electronic test equipment…
Frequency Meter
Frequency Meter A frequency meter is an electronic instrument used to measure the frequency of an electrical signal. It is a type of frequency…
Phase Sequence Meter
Phase Sequence Meter A Phase Sequence Meter (PSM) is an electronic device used to measure and determine the sequence of three-phase electrical power. It…
Energy / Watt / kWH Meter – (Single / Three Phases)
Energy / Watt / KWH Meter – (Single / Three Phases) An energy meter, also known as a wattmeter or kilowatt-hour (kWh) meter, is…
High Voltage / Spark Tester – (Up to 30 kV)
High Voltage / Spark Tester – (Up To 30 KV) A high voltage/spark tester is a device used to test the insulation quality of…
AC / DC Power Supply – (Up to 1000 V)
AC / DC Power Supply – (Up To 1000 V) An AC/DC power supply is a type of power supply that can provide both…
Megger / Insulation Tester – (Up to 5000 V)
Megger / Insulation Tester – (Up To 5000 V) A Megger or insulation tester is a type of electrical testing equipment used to measure…
ELCB / Earth Tester – (Up to 1000 mA / 100 Ω)
ELCB / Earth Tester – (Up To 1000 MA / 100 Ω) An Earth Leakage Circuit Breaker (ELCB) is an electrical safety device that…
Mill / Meg Ohm Meter – (Up to 1 GΩ)
Mill / Meg Ohm Meter – (Up To 1 GΩ) A Mill/Megohm Meter is an electronic device used to measure electrical resistance in units…
Decade Resistance Box – (Up to 1 GΩ)
Decade Resistance Box – (Up To 1 GΩ) A decade resistance box is a type of electrical device that is used for measuring resistance.…
Stop Watch / Timer / Counter – (Up to 24 hours)
StopWatch / Timer / Counter – (Up To 24 Hours) A stopwatch, timer, or counter is a device that can measure elapsed time or…
Ammeter / Voltmeter / Welding Machine – (Up to 1000 V / 1000 A)
Ammeter / Voltmeter / Welding Machine – (Up To 1000 V / 1000 A) An ammeter is an instrument used to measure the electric…
Multimeter / Clamp Meter – (Up to 1000 V / 1000 A)
Multimeter / Clamp Meter – (Up To 1000 V / 1000 A) A multimeter, also known as a volt-ohm meter (VOM), is a versatile…
Voltage / Current / Loop / Multifunction Calibrator – (Up to 60 V / 20 A)
Voltage / Current / Loop / Multifunction Calibrator – (Up To 60 V / 20 A) A calibrator is an instrument that is used…
Thermal / Humidity Mapping – (-80 to 1100 °C / 18 to 90 % RH)
Thermal / Humidity Mapping – (-80 To 1100 °C / 18 To 90 % RH) Thermal and humidity mapping is a process of measuring…
Hot Air Oven / Muffle Furnace – (Up to 1200 °C)
Hot Air Oven / Muffle Furnace – (Up To 1200 °C) A hot air oven, also known as a muffle furnace, is a laboratory…
Incubator / Water Bath / Auto Clave – (Up to 200 °C)
Incubator / Water Bath / Auto Clave – (Up To 200 °C) An incubator, water bath, and autoclave are all laboratory equipment used in…
Freezer / Chiller / Refrigerator – (-80 to 50 °C)
Freezer / Chiller / Refrigerator – (-80 To 50 °C) Freezers, chillers, and refrigerators are all types of cooling equipment that are commonly used…
Digital / Dial Thermometer – (-8 to 1200 °C)
Digital / Dial Thermometer – (-8 To 1200 °C) A digital/dial thermometer is a temperature measuring instrument that utilizes a sensor probe to detect…
Glass Thermometer – (50 to 250 °C)
Glass Thermometer – (50 To 250 °C) Glass thermometers are one of the most common types of thermometers used to measure the temperature of…
Temperature Bath / Calibrator – (-8 to 1200 °C)
Temperature Bath / Calibrator – (-8 To 1200 °C) A temperature bath or calibrator is a specialized piece of equipment used to measure, control,…
Temperature Sensor – RTD / Thermocouple – (-8 to 1200 °C)
Temperature Sensor – RTD / Thermocouple – (-8 To 1200 °C) A temperature sensor is a device that measures the temperature of a medium…
Temperature Controller / Indicator / Recorder – (-200 to 1800 °C)
Temperature Controller / Indicator / Recorder – (-200 To 1800 °C) A temperature controller/indicator/recorder is an electronic device that is used to monitor, control,…