S O L U T I O N S .

Mon-Fri : 24 Hours

  • Phone : +91 90436 60755
  • support@solutionss.org
CONTACT US

PI Tape

PI Tape

PI Tape

 

The PI Tape, also known as the P.I. Gauge Tape or the Pitometer Logarithmic Tape, is a specialized measuring tool used in industrial settings to measure the circumference and diameter of pipes, tubes, and other cylindrical objects. The PI Tape is particularly useful for accurately measuring the diameter of pipes and tubes that are difficult to access, such as those located in tight spaces or at heights. The PI Tape consists of a thin, flexible steel tape that is marked with a logarithmic scale, which allows for accurate measurement of diameters over a wide range of sizes. The tape is typically one inch wide and several feet long, and is wound on a spool or reel for ease of use. To use the PI Tape, the operator wraps the tape around the circumference of the pipe or tube to be measured, ensuring that the tape is snug but not too tight. The tape is then read at the point where the end of the tape meets the scale on the tape, which gives an accurate measurement of the circumference of the pipe. The diameter of the pipe can then be calculated by dividing the circumference measurement by pi (3.14159). Alternatively, the PI Tape may have a conversion chart printed on it that allows for direct reading of the diameter based on the circumference measurement. It is important to note that the accuracy of the PI Tape depends on proper use and calibration. The tape must be kept straight and tight during use, and it should be checked against a known standard periodically to ensure accurate readings. In addition to measuring pipe and tube diameters, the PI Tape can also be used to measure the size of other cylindrical objects, such as shafts, rods, and rollers. It is a simple, versatile tool that is widely used in industrial settings for precision measurements.

 

Need for PI Tape

In the field of Non-Destructive Testing (NDT), calibration services are essential to ensure that NDT instruments and equipment are functioning properly and providing accurate and reliable results. PI Tape is a useful tool in NDT calibration services for several reasons:

  • PI Tape is particularly useful for accurately measuring the diameter of pipes and tubes used in NDT applications, such as ultrasonic testing or eddy current testing. Proper calibration of these instruments requires accurate measurement of the diameter of the test object, and PI Tape can provide a precise measurement of pipe diameters over a wide range of sizes.
  • PI Tape allows for consistent measurements of pipe diameters, which is important for ensuring that NDT instruments are calibrated properly and providing consistent results. By using the same tool for all measurements, the potential for measurement errors and inconsistencies is reduced.
  • PI Tape can be used to measure the diameter of a variety of cylindrical objects, including pipes, tubes, shafts, and rollers. This versatility makes it a valuable tool in NDT calibration services, where a variety of objects may need to be measured.
  • PI Tape is a relatively inexpensive tool compared to other measurement instruments and equipment used in NDT calibration services. This makes it a cost-effective option for NDT service providers and companies that require regular calibration of their NDT instruments and equipment.

 

Efficiency and precision of PI Tape

PI Tape is known for its efficiency and precision in measuring the circumference and diameter of cylindrical objects. Its design incorporates a logarithmic scale that enables direct measurement of pipe or tube diameters, making it a simple and easy-to-use tool. PI Tape is also versatile, with a range of sizes available to accommodate different pipe and tube diameters. The accuracy of PI Tape depends on the user’s ability to correctly align the tape with the object being measured. However, when used correctly, PI Tape provides accurate measurements with a high degree of precision. The tape’s flexibility allows it to conform to the contours of the object being measured, ensuring an accurate reading. Furthermore, PI Tape has a resolution of up to 1/32 inch or 0.5 mm, making it a highly precise tool. The efficiency and precision of PI Tape make it an ideal tool for NDT calibration services and other applications where accurate measurement of pipe or tube diameters is crucial. PI Tape is also a cost-effective tool, making it accessible to a wide range of industries and professionals.

 

Applications and benefits of PI Tape

PI Tape has a wide range of applications and benefits, particularly in industries where the accurate measurement of pipe and tube diameters is crucial. In the oil and gas industry, PI Tape is used to measure the diameter of pipes and tubes used in drilling and pipeline operations. Accurate measurements of pipe diameters are necessary to ensure the proper functioning of equipment and to prevent leaks and other potential hazards. PI Tape is also commonly used in the power generation industry to measure the diameter of tubes used in boilers, turbines, and heat exchangers. In the manufacturing industry, PI Tape is used to measure the diameter of shafts and rollers used in various machinery and equipment. The benefits of using PI Tape include its versatility, accuracy, and cost-effectiveness. PI Tape provides precise measurements of pipe and tube diameters over a wide range of sizes, and its logarithmic scale allows for direct measurement of diameters, making it easy to use. Its low cost and simplicity make it an ideal tool for technicians and engineers, and its consistent results ensure reliable measurements.

 

Scope and significance of PI Tape

The scope and significance of PI Tape are vast, as it is a versatile and widely used tool in various industries for measuring the circumference and diameter of cylindrical objects. PI Tape is commonly used in industries such as oil and gas, power generation, and manufacturing, where precise measurements of pipe and tube diameters are essential. The accurate measurement of pipe diameters is crucial for proper calibration of NDT instruments and equipment used in these industries. PI Tape is also useful for measuring the diameter of other cylindrical objects, such as rollers and shafts, making it a valuable tool in industries where precision measurements are necessary. Furthermore, PI Tape is cost-effective, easy to use, and can provide consistent results, making it a popular tool for technicians and engineers alike.  

In summary, the use of PI Tape in NDT calibration services is important for ensuring accurate and reliable measurements of pipe diameters and other cylindrical objects, which is essential for proper calibration of NDT instruments and equipment. Its versatility and cost-effectiveness make it a valuable tool in NDT calibration services.

 

Why NDT and PHWT solutions

NDT and PHWT Solutions is a reputable company that offers a range of non-destructive testing (NDT) and Positive Material Identification (PMI) services to various industries. One of the key services provided by the company is PI Tape services, which are crucial for accurate calibration of NDT equipment and instrumentation. NDT and PHWT Solutions has established itself as a trusted provider of PI Tape services, thanks to its commitment to quality, accuracy, and efficiency. The company uses the latest technology and equipment to ensure the accuracy and precision of its PI Tape services. Its team of qualified and experienced technicians are trained to use PI Tape to measure the diameter of pipes, tubes, and other cylindrical objects accurately. They also have a deep understanding of the various industries where PI Tape is used and the specific requirements of each industry, ensuring that the measurements are in line with the relevant industry standards.

NDT and PHWT Solutions also prioritizes the satisfaction of its clients, providing personalized services that meet their unique needs. The company offers customized PI Tape services to clients in various industries, including oil and gas, power generation, and manufacturing. Clients can expect to receive quick and efficient services that are tailored to their specific requirements. The company’s commitment to quality is reflected in its strict adherence to industry standards and regulations. NDT and PHWT Solutions uses only calibrated and certified PI Tape that meets the relevant industry standards. Additionally, the company’s technicians follow strict quality control measures to ensure that every measurement is accurate and reliable.

In summary, NDT and PHWT Solutions is a leading provider of PI Tape services, offering reliable and accurate measurements of pipe and tube diameters to clients in various industries. With its commitment to quality, personalized services, and strict adherence to industry standards, the company has established itself as a trusted provider of PI Tape services. Clients can rely on NDT and PHWT Solutions to provide efficient, precise, and high-quality PI Tape services that meet their specific needs.

We Offering Measuring Instrument NABL Calibration Service For Pi Tape

Contact Experts